Adhesive Tapes: How You Use Them And How To Use Them

Adhesive Tapes: How You Use Them And How To Use Them

Kapton tape is a very resistant type of adhesive tape. The fact that it stays stable throughout an enormous temperature range - from -273 to 400°C - makes it suitable for a number of surprising uses. It was used extensively during the Apollo Moon missions, with Neil Armstrong even mentioning it by name because the Lunar Ascent Module left the surface of the Moon on its return journey to Earth. Within the type of tape, it has many more everyday uses the place a thin however durable insulator is required. These include insulation on wiring and other conductive components similar to capacitors, transformers and coils.

Anti-slip tape has a backing of finely ground mineral particle aggregate. In layman's terms, this means a rough surface which affords good traction to these stepping on it. It's good for use in both places the place slipping in probably (e.g. on a flat stone ground which is liable to get moist) or where to slip could be particularly hazardous (e.g. in factories, laboratories or areas in which specialist gear or supplies are kept, and on stairs). With the intention to ensure your anti-slip adhesive tape is reliable, nonetheless, you have to be sure that it's applied correctly.

With any type of adhesive tape - Kapton or anti-slip - it's essential to make sure that the surface to which you might be applying it is dry and free of contaminants. Water or damp can break down the chemical adhesive and lead to your tape turning into loose. Contaminants can have a equally dangerous effect. If, for instance, you have been to apply your adhesive tape to a particularly dusty flooring, then the damaging is that the tape adheres to the dust and never the floor. Again, the risk of the tape coming free is increased.

Temperature can also have an effect on the efficiency of some (non-Kapton) tapes; too sizzling and the adhesive could melt, too cold and it may be rendered inactive. The surface to which you're applying the adhesive tape ought to ideally be round 10°C. If you are applying the tape to stone, wood or another porous materials, then it might be worth utilizing a particular primer so as to increase the strength of the bond.

Remove the paper backer from the adhesive tape and press it towards the surface. Continue to apply pressure along the size of the applied tape. This can be done easily by hand, although the use of a seam roller could enable you to get a more even spread and ensure that all areas are firmly pressed down.

Anti-slip tape comes in a range of colors, suitable for quite a lot of contexts. Black hook and loop fastener white hazard line tapes are ideal for particularly hazardous areas, the place it is vital for an edge or potential danger to be highlighted. Plain black, white and yellow tapes are available for these contexts in which you would like individuals to stay secure, but don't need anything which appears to be like too harsh.